The Refill ink method and demonstration is for User to understand and DIY (Do-It-Yourself). The respective Original OEM Brands did not support, approved nor endorsed it. User is doing at his or her own risk and fully responsiblity (take ownership) for whatsoever decision and/or action taken. Nippon-ink supply the Ink Solution with accessories is bound by limited liability due to certain constraint, limitation and/or restriction beyond Nippon-ink control and boundary. All other Rights reserved.
PG50 and CL51;PG830 and CL831 is equivalent to PG40 and PG41. The only difference is the input ink capacity in the cartridge.
Nippon-ink Refill Ink Instruction and Procedure
Canon PG 40 (Black) and CL 41 Color
Step 1 – Remove the rubber stopper from the syringe.
Step 2 – Insert the needle onto the syringe tip.
Step 3 – Ensure cartridge print head in working condition and locate the inlet hole. Example on Canon PG 40 (Black) cartridge, need to remove Original label at cartridge top before you can see small inlet hole. Ensure you block the nozzle print head before refilling.
Step 4 – Use the ring screw to enlarge the hole for the needle to be inserted.
Rubber cap removes from syringe Needle insert on syringe Label on top cartridges
Remove label from cartridge top Using ring screw to enlarge hole
Step 5 – For Color cartridge insert needle and clean with tissue to check the color chamber before refill whereas Black is only one inlet. Ensure you pump the correct color to the correct chamber. Each Color chamber is about 10 ml and Black chamber is about 20 ml but it has some residue ink inside each chamber.
Step 6 – For Black ink pump 10 ml (1/2 tube) for Color (Cyan, Magenta & Yellow) pump 6 to 7 ml (1/3 tube).
Step 7 – Once completed, tape the cartridge top or leave it as it is. Remove the nozzle print head stopper and ready to install into the printer.
Note: For 40/830 Cartridge Pump 1/2 to 3/4 Syringe For 41/831 Cartridge pump 1/3 syringe Each colour (Cyan, Magenta, Yellow)
Nippon-ink refill kit set
Black Colour Black
(Pigment-based) (Dye-based) (Dye-based)
Black (Dye-based) – Single Tube Cleaning Solution
Support – Purchase – Use – Nippon-ink Refill Kit Set.
Disclaimer Clause: All brand name, logo, trademark, picture, part number, patent, design and technology belong to respective owners. It uses for descriptive, illustrative, comparative and explanation purpose. Nippon-ink and G-cap do not related to any Original OEM like Brother, Canon, Dell, Epson, HP, Lexmark, Samsung etc. All other rights reserved.